3,874.81 UAH
(14,927 JPY)
4 (2 всі відгуки)
Excellent
Material:At PlasticTank Motorcycles, we're saviors!Imported vehicles are Material:Because there are a lot of plastic tanks, magnetic bags cannot be used like the domestic ones As a countermeasure, there is a suction cup type bag, but the shape of the tank itself is complicated The Suction Cup will also deteriorate over time, as it tends to float or come off easily when you put heavy objects in it (By wetting the Suction Cup with water, the suction power is increased.)
Overseas, it seems that there is a need to fix the bag to the tank cover Manufacturer or attach the attachment to the Tank and fasten the back with it Manufacturer is also available (All of which are somewhat expensive.)
This product fixes the Base part to the body of the vehicle with Band, and the Base part and the haversack part have a buckle and Magic Tape to secure it in place
The pad is attached so that the Tank mounting surface of the Base may not be scratched, and the Belt is also a loose stop It is attached
The bag is 5L and Small swing, but you can have a good feeling that the Mapple goes in easily (As for the other company's, there are a lot of oddities in and out of the Large
Reviews For DEGNER Танковий сумка типу ременя From Other Webike User
Average
Used with Tenere 700The tank of Tenere700 is painted with Matte and cannot be installed with Suction Cup, and the front of the tank is Plastic, so Magnet is not attached. (TankRing Type is also made in foreign countries, but the price is too high) I arrived at this product after searching. The design is not bad, but the inside is a partition that can be moved with Magic tapeQuantity:There is no Inner Pocket in 1pc. and it is not easy to use. If there is one more device, it is good. It is inferior to the product of the company T for the price. Unfortunately, there is no Tank Bag of this type in the T company, and there is no room of choice.
I like YAMAHA motorcycles, but YAMAHA. I like YAMAHA's motorcycles, but YAMAHA, please think a little more before making motorcycles.View Detail
Most Viewed Reviews Of DEGNER Tank Bags
Average
Suction Cup ReplacementI had been using it for a long time because it was just the right size, but the suction cup was ruined and I had to replace it.
Suction Cup replacement for this Bag is not possible Type, but it would be easy to do, and I did it!
All you need is Cutter, Nipper or Radio pliers, etc. and a hundred Suction CupQuantity:2pc. SetInputQuantity:2 Sets.
https://jp.daisonet.com/collections/remodeling0206/products/4549131632637
Suction Cup can be easily cut by pulling it under tension.
? When cut, you will see a steel core, pull it out using pliers, etc.
? but this is also the case. Robust. It had to be this sturdy to keep it from coming off. The GRUGRU was pulled out by pinching it with the nipper and using the leverage of the wrist. The Cushion material is not necessary, so it was discarded.
Drilling holes. Drilling a hole. you can drill through with a cutter, but I melted the hole size because I had a solder iron.
Pass the Suction Cup through the Hook and fasten the Hook at the back. This hook is easy to break if you screw it on as it is, so you can easily insert and remove it by attaching a flange. If it breaks, use a ring or something to hold it in place.
Left is Before, Right is After
It's not terribly difficult, but you need a nipper that you can grab tightly, even if it's a hundred bucks!
Special note
This is its successor? This is the type that can replace the Suction Cup.
https://www.webike.net/sd/20110672/
Highly recommended as the price is the same.View Detail
Very Good
Compact and easy-to-use Large size.I use it for short tours and small purchases.
Was the one you received as per Image?
It was a little smaller than I expected (no problem).
Thanks to its compactness, it does not affect the Riding position even when placed on a tank, making it very useful.
This compactness is especially appreciated for SS models with a strong forward lean and for motorcycle models with low handlebars of the separate type.
How was your experience with it?
Above. It was a little smaller than I expected." The zipper is easy to use, and it has enough storage space for this size.
[Points to note]
It is better to check the size that meets your purpose of use and, in some cases, to check the actual product at a motorcycle accessory store before purchasing it to avoid any regrets later.
Suction cup type may be difficult to adhere to tanks with complicated shapes or matte painted parts.
How did it compare to other products?
Assuming that there are individual differences, the movement of each zipperretc. is smooth without getting caught, and it is a well-tailored product without feeling stress when taking things in and out of storage (I used to have a cheap tank bag that had many zippers that got caught, and it was very frustrating). ).
0Other items that may be useful include
Point and hang of installation
As mentioned above, the suction cup type can be installed regardless of the material, but avoid tanks with a shape that is difficult for the suction cup to adhere to or surfaces with a matte finish.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I fully understand that it is a finishing touch, but I would be happier if it were a little cheaper.View Detail
Excellent
I use it with my phone in it!I use it as Navigationetc. with my phone in it when Touring.
The Suction Cup is not reliable, so I fix it to the Handlebar with Magic tape.
In summer, it is necessary to pay attention to the heat that may be trapped in the case, but it is easy to put on and take off and does not choose the motor cycle.
I have been using it for more than 5 years and have had no problems with durability.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING