187.68~ UAH
(723 JPY)
3 (6 всі відгуки)
Very Good
It's easy and easy to use.I used this product to adjust the balance of Aluminum Wheel. You can cut it to your favorite weight and the adhesion is so strong that you don't have to worry about it peeling off.
Reviews For J Trip Вага колеса балансира From Other Webike User
Average
goodI bought this because I was running out of Weight left when I replaced my Tire.
I found it a bit surprising that JTrip, famous for STAND, was selling Wheel's Balance weight.
However, since I usually use STAND of JTrip and feel the goodness of this brand, I think that honestly Weight is the same no matter what I use, but I chose this product this time because I wanted to use the one of the brand that I put my trust in anyway.View Detail
Very Good
WheelBalance essentialsBalanceWeight is indispensable for adjusting Wheel Balance.
J-TRIPWheel Balancer Weight is a Type that uses 60 grams per sheet and cuts it to the required size with Nipper etc..
Scissors of Large texture can cut it enough, but because the blade can not be cut, we recommend using worn items.
Weight is 60 g of 5 g X 4, 10 g X 4 and is connected in the order of 5 + 10 + 5 + 10 + 5 + 10 + 5 + 10.
Because the back side has a strong adhesive tape, you can firmly paste it on the Wheel.
For storage it was likable that the inner bag with Zipper made by Vinyl was included!
Although there is no problem in use, I think that it was still better because the cut line will be beautiful when it contains Cut Line if possible.
To take Balance, use a manual Wheel balancer that you had before.
It is a translation to repeat the steady work, but it makes physical sense even physically, since it can measure with your own eyes, I think that it can be adjusted more precisely than Mechanical personally.
Manufacturer The factory StandardBalance is 10 to 20 g per pc. Should it be over 50 g by taking Balance, let's adjust so that Weight will be reduced by not changing the position where Tire is assembled without getting overwhelmed.
It is a mere weight, but since it is a part affecting the running balance, let's adjust it firmly without compromising!View Detail
Most Viewed Reviews Of J Trip Wheel Weight
Average
goodI bought this because I was running out of Weight left when I replaced my Tire.
I found it a bit surprising that JTrip, famous for STAND, was selling Wheel's Balance weight.
However, since I usually use STAND of JTrip and feel the goodness of this brand, I think that honestly Weight is the same no matter what I use, but I chose this product this time because I wanted to use the one of the brand that I put my trust in anyway.View Detail
Very Good
WheelBalance essentialsBalanceWeight is indispensable for adjusting Wheel Balance.
J-TRIPWheel Balancer Weight is a Type that uses 60 grams per sheet and cuts it to the required size with Nipper etc..
Scissors of Large texture can cut it enough, but because the blade can not be cut, we recommend using worn items.
Weight is 60 g of 5 g X 4, 10 g X 4 and is connected in the order of 5 + 10 + 5 + 10 + 5 + 10 + 5 + 10.
Because the back side has a strong adhesive tape, you can firmly paste it on the Wheel.
For storage it was likable that the inner bag with Zipper made by Vinyl was included!
Although there is no problem in use, I think that it was still better because the cut line will be beautiful when it contains Cut Line if possible.
To take Balance, use a manual Wheel balancer that you had before.
It is a translation to repeat the steady work, but it makes physical sense even physically, since it can measure with your own eyes, I think that it can be adjusted more precisely than Mechanical personally.
Manufacturer The factory StandardBalance is 10 to 20 g per pc. Should it be over 50 g by taking Balance, let's adjust so that Weight will be reduced by not changing the position where Tire is assembled without getting overwhelmed.
It is a mere weight, but since it is a part affecting the running balance, let's adjust it firmly without compromising!View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING