It is a story when I put it on KTM DUKE 200. it is good for the person who doesn't do Tandem, but because it is a big box, even if I put it on the back just barely with the carrier of DAYTONA, it is still too much front side and Tandem rider is very tight and objectionable. (Lol)
So I extended the Carrier. I hope this is helpful.
The installation is perfect with just a couple of Tie Wraps to hold it in place tightly. That is not easy to cut.
The GIVI Mono Lock Case trunk purchased by webike has a space of 43L, which can hold a helmet and clothes. The built-in base can be firmly installed on the rear shelf of the motorcycle. The lining and back of the trunk are standard, which is very good.View Detail
这款GIVI Mono Lock Case尾箱,它具备强大的装载能力,空间达到了43L可以放置一顶全盔还有衣物,自带底座可以很稳固的安装在摩托车的后货架上,内部配置有防震垫,可以防止骑行中尾箱内部的物品震动,靠背也是标准配置无需单独购买,很强大的一款尾箱View Detail
I have bought 3 Givi Mono Lock cases in the past few years, with each successive one larger in capacity. I thought a 37 liter case would be enough, but after I put a 45 liter case on my wife's scooter, I decided going bigger is better since we haul groceries and supplies in it almost every day. What I like about this Give 43 liter case is: 1). It allows you to strap some extra gear on the top with a cargo net. 2). The case is more squarish than other Givi cases and this helps you fit more tall items in the case. 3). It comes with a liner cushion cut to fit. 4. It comes with the seat back pad already installed Other Givi cases I've bought require you to buy the seat back pad separately and install it yourself. I actually have a Givi universal mounting base installed on a PCX150, Honda XR250 Baja, and Honda XR400 Motard and can use this new case on all of them. That's good because I have some things like tools, raincoats, etc that I want on any of these bikes when I ride them.View Detail
good finishing & fast delivery!can't wait to attach on my scooter!it's functional & practical.i would like to suggest friends to order it if they require the same function for the tail box.View Detail
I ride my Motorcycle with my study bag in my Depack when I go to the library to study, and the Rear box is also useful to put my helmet and rain gear in.
The size that 1pc. of full face helmet can easily fit in was about 37L, but when I put the helmet in, I took out the rain gear and other contents once and put the helmet on the floor, and I had to repack what I took out in the space between the rain gear and the helmet, so it felt quite tight with 37L, so I took a chance and bought this 43L. I decided to go with the 43L. I felt that the 37L was too tight, so I decided to go for the 43L. A little bit of tools can easily fit in it.
If you choose between an oval and a square, the square one can hold more things. I bought a box of pizza, but I could fit a 25cm box of pizza in it. The top plate is also flat, so there is no need to say anything about the mechanism to fasten it with the included rubber net.
The biggest concern was whether the tandem seat would not be crushed by too much charge, but I attached the base plate with 1/3 of the base plate sticking out from the carrier, and I think it fits in the tandem seat if you are thin like in the picture? But if you attach the base plate with 1/3 of the base plate sticking out from the carrier and if you are slim, I think it will fit in the tandem seat.
I think the Tandem seat will be crushed about 1/3 of the way down if you put it on too tight.
I think Large is sturdy as long as you don't put anything too heavy in it.
Photo? It's pretty big in appearance, as you can see in the
Photo? It is also powerful when viewed from behind, as in the photo?
Base plate installation was quite difficult because the front net bar was too thin and the clamps were too scanty for Gixxer's DAYTONACarrier, making positioning quite difficult.
In conclusion, maybe you should temporarily fix the back side first, and then fix the front side.
Photo ? is the back side and photo? is the front side.
Photo? The base plate in the photo is not that bad in terms of parenthesis.
I'm going camping in September, so I decided to go with this one, but I think it's a little too large for normal use;
Mono-lockSpec. has a common base plate, so it can be a little smaller, so it may be changed depending on the application.
My concern is that the Gixxer stop lamp is visible at the height of a passenger car, but just barely at the height of a van? We may have to think of something to work with the stop-lamp.
By the way, the AGV Sticker is sold separately and not included.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING