Загальний кут встановлений для зручності обслуговування.
Технічне обслуговування штангенциркуля, зняття та монтаж валу моста тощо. можна легко.
5-ступінчасте регулювання висоти (710мм-830мм внизу стебла)
Матеріал: нержавіюча сталь (SUS304 # 400 полірувальний матеріал).
Він назавжди збереже прекрасний блиск.
Основа виконана з розкішного вирізу з нержавіючої сталі, який ідеально підходить під кут, щоб вміститися у вузькому просторі під стеблами.
• Він не займає місця під час зберігання або переміщення, оскільки це складний виріб.
Технічне обслуговування навколо фронту, зима тощо.. Будь ласка, використовуйте його також для тривалого зберігання.
При використанні у поєднанні із задньою стійкою фабрики бою покращується стійкість.
Передня стійка має коліщатко на землі, а задня стійка має плаваючий ролик.
Оскільки ролик задньої підставки плаває, підставка буде стійкою на землі.
Якщо ролик на задній стійці знаходиться на землі, транспортний засіб рухатиметься вперед-назад і стане нестабільним.
Stand Boss розроблений таким чином, щоб бути змінним, щоб власники декількох автомобілів могли використовувати його, просто замінивши начальника додаткових деталей.
Боси доступні від 13мм до 28мм.
Будь ласка, виберіть внутрішній діаметр стовбура та вільний простір стійки, щоб бути менше 0,5 мм, якщо внутрішній діаметр менше 20 мм, і менше 1 мм, якщо внутрішній діаметр більше 20 мм, для зручності перенесення та обслуговування.
Він розроблений, щоб мати можливість ВСТАНОВИТИСЯ під найбільш підходящим кутом, скорочуючи вставну частину та звужуючи зазор.
Він також розроблений для легкого від'єднання ..
●The overall angle is set for ease of maintenance.
Easy maintenance of calipers and removal of axle shafts.
●5-step height adjustment (adjustable range: approx. 710mm - 830mm at the height below the stem)
●Made of stainless steel (SUS304 #400 polishing material) to resist rust and scratches.
Maintains a beautiful shine for a long time.
●The base is made of luxurious stainless steel and is perfectly angled to fit in the narrow space under the stem.
●It's a foldable product, so it doesn't take up a lot of space when it's stored or moved.
●Please use it not only for the maintenance around the front, but also for the long-term storage in winter.
●Use with Battle Factory rear stand for better stability.
The front stand has the casters on the ground and the rear stand has the casters floating.
Because the caster of the rear stand floats, the main body of the stand touches the ground and becomes stable.
If the caster of the rear stand is on the ground, the vehicle will move back and forth and become unstable.
●The stand bosses are interchangeable, so even if you own multiple vehicles, you can use the stand simply by replacing the bosses with optional parts.
Bosses are available from 13mm to 28mm.
The clearance between the inner diameter of the stem and the stand boss should be less than 0.5mm if the inner diameter is less than 20mm and less than 1mm if the inside diameter is more than 20mm.
It is designed to be able to stand up at an optimum angle by shortening the insertion part and narrowing the clearance.
It is also designed to be easily detachable.