Багатофункціональний вимірювач, який може бути встановлений без необхідності будь-якого процесу підключення і т.д.. просто обмінюючись з OEMMeter "Super Multi РК-лічильник" !!
На додаток до функції OEMMeter, температура двигуна, співвідношення повітря-паливо, напруга батареї також можуть бути відображені!
Супер-багатофункціональний РК-лічильник має багато функцій, такі як функція утримання піку швидкості обертання · швидкість · температура, переднє колесо, корекція зовнішнього діаметра шини, зміна кольору заднього світла тощо. Вибравши окремо Powertest MODE, функцію вимірювання часу прискорення (З графічним відображенням) Ми також маємо.
[Про PowertestMODE]
Це повністю автоматизована функція вимірювання прискорення, і вона починає вимірювання автоматично разом з початком обертання переднього колеса.
При досягненні заданого часу роботи або відстані вимірюйте та зупиняйте автоматично.
Час налаштування: 5-60 секунд (Через 5 секунд).
Відстань до відстані: 20 · 30 · 40 · 50 · 60 · 70 · 80 · 90 · 100 · 200 · 300 · 400 · 500 · 1000 (m)
Можна записувати Пам'ять на 9 записів, можна прочитати і перевірити після запуску.
Не тільки відстань руху при досягненні заданого часу роботи і кінцеве значення швидкості в момент досягнення відстані, всі відстані руху, швидкість і число обертів двигуна записуються з кроком 0,1 секунди від початку руху можна перевірити значення даних за допомогою Graph, і є функція, яка дозволяє легко перейти до перших даних, пробіг яких перевищує 50, 100, 200, 400, 500, 1000 м.
Наприклад, ви можете виміряти запис на 400 метрів і легко відобразити опорний час, коли проходите 100 метрів тощо. Аналогічно функція переміщення до першої Дані перевищує 50, 100, 150 км / год Так.
(Однак, оскільки запис знаходиться в одиницях 0,1 секунди, це буде перший запис, що перевищує вибране значення, а не точна відстань або швидкість.)
Запис можна стерти довільно для кожного вимірювання, але якщо ви не вилучите його, вимкнення ключа або видалення батареї з лічильника не видалить дані.
The "Super Multi LCD Meter" is a multi-functional meter that can be installed simply by replacing the stock meter without any wiring modifications!!
In addition to the functions of the stock meter, engine temperature, air-fuel ratio, and battery voltage can also be displayed!!!
The Super Multi-LCD meter is also equipped with a number of other functions, such as a peak hold function for RPM, speed, and temperature, front tire diameter compensation, and backlight color change.By selecting the power test mode separately, it also has a function to measure the section acceleration time (with graph display) as a function for competition.
[About Power Test Mode]
This is a fully automatic acceleration measurement function that automatically starts measurement when the front wheel starts to rotate.
Measurement stops automatically when the set running time or distance is reached.
Configurable time: 5-60 seconds (in 5 second increments).
Configurable distance: 20・30・40・50・60・70・80・90・100・200・300・400・500・1000 (m)
The recordings can be stored for 9 measurements and can be read out and checked after each run.
The distance traveled and the speed at which the distance is reached are recorded in 0.1 second increments from the start of the trip, as well as the final values of the distance traveled and the speed at which the distance is reached, and the values at any given position can be viewed in a graph.Also, there is a function to easily move to the first data after 50, 100, 200, 400, 500, or 1000 meters of riding distance.
For example, the record is measured at 400m and the reference time at 100m can be easily displayed.Similarly, there is a function to move to the first data beyond 50, 100 and 150 km/h.
(Note that the record is in increments of 0.1 second, so it is not the exact distance or speed, but the first record that exceeds the selected value.)
The data can be erased at any time after each measurement, but the data will not be lost even if the key is turned off or the battery is removed from the meter unless the data is erased.