[Кількість] 1шт.
[Розмір]
Шуруп Діаметр 10мм
Охоплення 19мм
Роз'єм для ключа розміром 16мм
[Форма] Термінал окремий тип
[NGK Correspondence] CR8E, CR9E, CR10E, CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EK, CR9EK, CR10EK, CR8EIX, CR9EIX
* Фотографія продукту лише для довідки. Продукт проданий за штуку.
* Тип реєстру (з опором)
* Розмір ключа для розетки 16 мм, який використовується для роз'єму C.
* Ті, котрі мають монтажний гвинт діаметром 10 мм і монтажний гвинт довжиною 19 мм, є сумісними.
* Можна зняти заклепковий кран.
* Будь ласка, заздалегідь зауважте, що скасування та / або повернення цього продукту не можуть бути прийняті після того, як замовлення було розміщено.
AOR12LGS (NGK "C plug" size)
[Quantity] 1
[Size]
・Screw diameter 10mm
・Reach 19mm
・Plug wrench size 16mm
[Shape] Terminal separation type
[NGK compatible] CPR8EA-9, CPR9EA-9, CPR10EA-9, CR8EIX, CR9EIX
*Heat value correspondence is from No. 8 to No. 10.
*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition system tuned bikes - available.
*Ignition system stock bikes - Not available
*Fully transistor ignition bikes - available.
*CDI ignition bikes - Not available.
*4-stroke bikes - available.
*2-stroke bikes - full transistor ignition system is available.
*Brisk LGS plug has become an extremely wide plug gap setting, and because the ignition ability that can only discharge to this is necessary, it may not function sufficiently in the stock ignition system.
*Please note that it does not fit CDI ignition system.For CDI ignition bikes, Brisk ZC/ZS type is applicable.
*Images are for reference only.The product is sold by the unit of one bottle.
*Resistor type (with resistor).
*Plug wrench size is 16mm which is used for C plug etc.
*The terminal is separable, so it is compatible with any plug cap shape.When the unit is shipped, it is only lightly screwed in, so check the tightness of the terminal when installing
*Refer to the NGK plug list for compatibility.All the mounting threads with a diameter of 10mm and a length of 19mm have compatibility.
*The tightening torque is 0.9kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.