- напади:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...і більше.
Works better than NORMAL.OEM Brake hose was too short to use.Детальніше - напади:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...і більше.
Good quality. Very fast delivery. If anyone looking for some retro style, cool looking master cylinder, this is the right one. Детальніше - напади:
- KAWASAKI supersherpa 97-07
- KAWASAKI barios 91-97
- KAWASAKI Varios II 97-07
- SUZUKI GN125E 82-00
- SUZUKI WOLF50 90-99
- ...і більше.
It was worn and used for BALIUS1.I was using it mainly for commuting and mountain passes, but perhaps because I use the rear wheel so much, I started to hear a rattling noise after about 2,000 km, and...Детальніше - напади:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...і більше.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Детальніше - напади:
- SUZUKI WOLF50 94 (Wolf) [Frame No.]NA11A-197863 or later [Parts used]Front:1 set
- SUZUKI WOLF50 93 (WOLF) [Frame No.]NA11A-193815 or later [Parts used]Front:1 set used
- KAWASAKI ZXR250 94 [Frame No.] ZX250C ■Rear:1 set used
- KAWASAKI ZXR250 93 [Frame No.] ZX250C-011001 or later ■Rear:1 set used
- KAWASAKI ZXR250 92 [Frame No.] ZX250C-005001 to 011000 ■Rear:1 set used
- ...і більше.
I'm using it with BALIUS1 and A5 Front, and I'm already using Quantity:I have about 4 more sets. They are available for most car models, and even if your car doesn't have sporty brake pads, you can st...Детальніше - напади:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...і більше.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.Be sure to bleed the air and refill the fluid in the MASTER after replacement.Th...Детальніше - напади:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...і більше.
Suitable for Handlebar with lowered Grip end.The Lever touch is also perfect, and the subtle Release operation can be performed without a sense of tension.I felt it.Compared to the separate type, the ...Детальніше - напади:
- KAWASAKI KLE250 ANHELO LE250A [stock number]43082-1116 [model name]KLE250-A1/KLE250-A1A/KLE250-A2
- SUZUKI WOLF (Wolf) NA11A [Genuine part number]59300-04830/59300-04840 [Model name]TV50/TV50M/TV50P
- SUZUKI KATANA (KATANA) NF41B [stock number]59300-33812/59300-04830 [model name]GS125EK/GS125EM
- SUZUKI KATANA (KATANA) NF41B [stock number]59300-33812 [model name]GS125E/GS125E-2/GS125EJ
- SUZUKI GSX250FX ZR250C [stock number]K4308-21204 [model name]GSX250FXK2/GSX250FXK3/GSX250FXK4/GSX250FXK5/GSX250FXTK3/GSX250FXTK4/GSX250FXTK5
- ...і більше.
I use it in my commuter vehicle and it doesn't seem to reduce at all.I've been using it every day with my commute for about a year after the exchange, but when I checked the thickness of the Pad the o...Детальніше - напади:
- KAWASAKI FX400R 86 [Position/Number of discs] Front/Double disc [Compatibility
- KAWASAKI EX-4 94 B I [part used] rear [degree of fit]○ ○
- BUELL THUNDERBOLT S3 part used]rear [fitment]◎
- KAWASAKI AR125 83-87 A/S II to IV[Application Areas/Number of Discs]Front/Single Disc [Degree of Fitting]○.
- BUELL S1 94-97 [part used]Rear [fitment]◎
- ...і більше.
ESTRELLARS is unreliable with one push 1 POT, but since I switched to this RK's MAX, I haven't had a single anxious moment.I used to use RK's FA5, but sometimes I had a hard braking sensation (i.e. no...Детальніше - напади:
- KAWASAKI FX400R 86 [Position/Number of discs] Front/Double disc [Compatibility
- KAWASAKI EX-4 94 B I [part used] rear [degree of fit]○ ○
- BUELL THUNDERBOLT S3 part used]rear [fitment]◎
- KAWASAKI AR125 83-87 A/S II to IV[Application Areas/Number of Discs]Front/Single Disc [Degree of Fitting]○.
- BUELL S1 94-97 [part used]Rear [fitment]◎
- ...і більше.
I was using BALIUS?s with about 100,000 km of replacement.But I bought the second generation BALIUS2 after getting a 3 year blank, so I bought it as stock. The photo shows both for Front and for Rear....Детальніше - напади:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...і більше.
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValveIt is made of stainless steel and looks greatI don't know if seal tape is necessary, but just in caseДетальніше - напади:
- HONDA SPACY125 03-07 [Where used] Right side
- KAWASAKI 500SS MACHIII (H1) 72-75 H1B-F
- HONDA XR50 MOTARD 05-07
- HONDA XRV750 AFRICA TWIN 93-96
- HONDA XR400 Motard 05-08
- ...і більше.
Installed on GB250Installation is not very difficult and takes about 30 minutesLever is Quantity:Pair (for Left and Right) The OEM was ported because it was changed inI shaved a little bit with Grinde...Детальніше - напади:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...і більше.
No functional problemsIt's a hobby to change from OEM as it's not used very oftenThe front brake is compatibleI installed it on a non-compliant rear brake for a test run, but the Fluid leakedThe OEM h...Детальніше - напади:
- HONDA SPACY125 03-07 [Where used] Right side
- KAWASAKI 500SS MACHIII (H1) 72-75 H1B-F
- HONDA XR50 MOTARD 05-07
- HONDA XRV750 AFRICA TWIN 93-96
- HONDA XR400 Motard 05-08
- ...і більше.
Nissin brake master cylinder arrived in Australia in excellent condition and works beautifully on my VFR750.
It Is very well made and looks great on my bike. Lever adjustment is very easy and effe...Детальніше - напади:
- HONDA SPACY125 03-07 [Where used] Right side
- KAWASAKI 500SS MACHIII (H1) 72-75 H1B-F
- HONDA XR50 MOTARD 05-07
- HONDA XRV750 AFRICA TWIN 93-96
- HONDA XR400 Motard 05-08
- ...і більше.
The OEM Brake master fee ring doesn't feel right (Did the air bite some?) I also thought about Radial, but it's not a good idea I was worried that it would do something bad to the ABS & there is no cl...Детальніше - напади:
- HONDA XR100MOTARD 05-07
- YAMAHA TZR50 93-99 R
- YAMAHA TZR50 90-92
- HONDA VTZ250 87
- YAMAHA TT250R RAID 93-00
- ...і більше.
brembo, with the replacement of Radial Mount 100mmMaster Cylinder was also changed from OEMi'm happy with the tighter fee ringДетальніше - напади:
- HONDA SPACY125 03-07 [Where used] Right side
- KAWASAKI 500SS MACHIII (H1) 72-75 H1B-F
- HONDA XR50 MOTARD 05-07
- HONDA XRV750 AFRICA TWIN 93-96
- HONDA XR400 Motard 05-08
- ...і більше.
This is an in-play for the CBR400RR/NC29Nisshin's SemiRadial master at the time of delivery, probably due to age-related deterioration It's a matter of taste, but I've replaced the cylinder with the S...Детальніше - напади:
- HONDA SPACY125 03-07 [Where used] Right side
- KAWASAKI 500SS MACHIII (H1) 72-75 H1B-F
- HONDA XR50 MOTARD 05-07
- HONDA XRV750 AFRICA TWIN 93-96
- HONDA XR400 Motard 05-08
- ...і більше.
I put a 14mm Mesh hose in my SRX400 I don't know if it's because Lever is so far away and AxelControl is hard to do, and it's not very subtle I can't control it, so I'm going to put this 1/2-inches on...Детальніше - напади:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...і більше.
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the productДетальніше - напади:
- HONDA CBR1000F 93-00
- HONDA CBR600F 92-98
- HONDA VFR750F 90-97
- HONDA VF400 83-84
- HONDA SL230 97-00
- ...і більше.
The SRV250's OEM Brakes inevitably have a bad Touch, and the Brake Pads and Replacing the brake hose didn't improve the situation much, and cleaning the Caliper Pistons didn't help much either It was ...Детальніше
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING