- напади:
- SUZUKI GSX250R 18-21 *A separate Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI V-STROM650 07-09|12|14-19 DL650/K7/K8/K9/L2/L4/L5/L6/L7/L8/L9 *If you have Kijima throttle pipe part number 201-5371 separately
- it will be useful for installation.
- SUZUKI GSX-S1000 17-18 L7/L8 *Special Kijima throttle pipe part number 201-5371 is useful for installation.
- SUZUKI GSX-R750 08-09|11-19 K8/K9/L1/L2/L3/L4/L5/L6/L7/L8/L9 *If Kijima throttle pipe part number 201-5371 is separately available for installation
- ...і більше.
This is 3rd time i use Kijima grip heater.
I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without ad...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips!
I have good luck with most all webike products.
I purchased 1 of these along with the associated heated lock...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful
I'm willing to install it on my other bike.Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
Second time use kijima heated grip. I used gh08 last time and this time gh10.
It is quite easy for install and internal switch makes handle bar clean.
Highly recommend this heated grip.Детальніше - напади:
- SUZUKI V-Strom 650 VP56A
The kit is made specifically for my motorcycle, so it fits well. The instructions are unclear in some steps, such as removal of stock bar ends and which parts to re-use. However, after referencing the...Детальніше - напади:
- SUZUKI SV1000S 03-07
- SUZUKI TL1000S 97-01
- SUZUKI TL1000R 98-03
- SUZUKI INAZUMA1200 98-99
- SUZUKI INAZUMA400 97-01
- ...і більше.
2023 GSX S1000 에 완벽하게 호환되서 작동합니다!그립감도 아주좋쿠요! 퀄리티 또한 순정틱합니다!
빠른배송도 아주좋쿠요!
자주 이용해야할 바이크 쇼핑몰!
배송료만 조금 싸지면 좋겠는데ㅠㅠ
더많은 물건 구매하고 싶네ㅠㅠДетальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heati...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
我的摩托是YAMAHA XMAX300,一直都想改装一款加热手把,在别的网站上害怕买到不好的产品,所以我在webike上购买了这款KIJIMA加热手把,这款加热手把支持各种型号的摩托安装,安装简便,需要注意的是需要专业人士接线。实际体验后加热效果很好。Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
I live in Canada and heated grip are not a luxury. It allows me to use my motorcycle a few additional months. These grips are great quality, easy to install and offers allot of heat settings to make m...Детальніше - напади:
- SUZUKI DL1000 V-STROM650XT ABS
- SUZUKI DL1000 V-STROM650 ABS
I installed it on my vSTROM250. right side is fine, left side needs some modification. normal clutch lever has only one place, but other brand product has one more place for internal modification.Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
[How is it used?I purchased and installed this product for use in Touring during the winter months.Was the one you received as per Image?The Grip diameter was almost the same as OEM.Was the installati...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
"NC750X直接安装,120长度正好,不影响护手安装,完美配合,安装市场半个小时,安装后手感佳,温控分档细!目前南京0度气温,2到3档足够使用。
----------------------------------------------------------
NC750X is installed directly, 120 long, does not affect the h...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
The design is not cheap, and the warmth is effective.It's a good fit.There will be a gap of about 5mm.That's the only thing I don't agree with...Ninja400 EX400-EДетальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
[How is it used?CommutingWas the one you received as per Image?YesWas the installation difficult?There are three parts to choose from to attach the Accelerator Wire, but I wasn't sure which one to put...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
[How is it used?It is a city ride and a day touring.Was the one you received as per Image?Image (Since it's a Repeat purchase).Was the installation difficult?I installed it on my JC92 Grom, but I had ...Детальніше - напади:
- SUZUKI SV1000S 03-07
- SUZUKI TL1000S 97-01
- SUZUKI TL1000R 98-03
- SUZUKI INAZUMA1200 98-99
- SUZUKI INAZUMA400 97-01
- ...і більше.
I bought it because the brake lever part number is the same for 1000 (XT) and 1050 (1050XT is different, but probably only the lever color is different). As I thought, I just put it on and no problem ...Детальніше - напади:
- YAMAHA CYGNUS Gryphus 22 *It is convenient to connect to the optional coupler using Kijima product 304-7148
- in which case the plus and minus are reversed.
- YAMAHA CYGNUS X 16-19 *It is convenient to connect to a position light using Kijima product 304-71485
- YAMAHA CYGNUS X 07-12 (28S) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- YAMAHA CYGNUS X-SR 13-15 (1YP) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- ...і більше.
This winter, the temperature has been below 0 degrees Celsius, and I couldn't stand the coldness of Lever even though I commute only 6 km, so I decided to buy it.The GripType was also attractive, but ...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
Installed on the FZ1 FAZER. This time, it is a replacement from OEM Option.[Mounting]In short, the point of installation is to remove the cowl, because it will work if the +- wiring can be done.Also, ...Детальніше - напади:
- YAMAHA CYGNUS Gryphus 22 *It is convenient to connect to the optional coupler using Kijima product 304-7148
- in which case the plus and minus are reversed.
- YAMAHA CYGNUS X 16-19 *It is convenient to connect to a position light using Kijima product 304-71485
- YAMAHA CYGNUS X 07-12 (28S) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- YAMAHA CYGNUS X-SR 13-15 (1YP) *It is convenient to wire to the optional coupler inside the front cover using Kijima product 304-7141
- ...і більше.
Installed on 125Scooter for commuting.The temperature is quite warm. It becomes about a hot drink of a vending machine.I think it is necessary to use it together with the Handlebar Cover, but I am sur...Детальніше - напади:
- SUZUKI HAYABUSA 08-09|11-19 [Model]GSX1300R K8
- K9
- L1
- L2
- L3
- ...і більше.
The GH07 grips on my MT-09 were worn out and started to slip, so I upgraded to a new model.It's so thin! It's supposed to be only 1mm different from the Catalogue value!The operation feeling of the Sw...Детальніше
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING